I purchased a model without an SSD, received the driver from the seller and installed it, but the touch does not work properly. The same applies if you use the driver posted here. Is there anyone whose touch functions normally?
top of page
bottom of page
I fixed the touchscreen problem with the inverted Y and X axis. My touches were registered in different locations than where I put my finger. The seller on Aliexpress sent me drivers. You have to uninstall the previous drivers in Device Manager.
Right-click on (Human Interface Devices ---> GoodixTouchDriver Device).
Click "Uninstall Drivers."
Go to the Menu bar at the top, click on "Action", then select "Scan for hardware changes." (Windows try to install the drivers again, if this is the case, repeat steps 1-2).
Then go to "Other Devices" -----> "Unknown Device." and right-click that and click on "Update Drivers."
Browse to the folder of the extracted ZIP and use those drivers.
I didn't have to restart my computer and the touchscreen already works. I included the new drivers below. Add to your Google Drive as future backup.
https://drive.google.com/file/d/1qm--loTcdLfrT2MhmF6rMC1PqOLpSZP9/view?usp=sharing
thank you I'll try it later when I get home.
please upload the touchscreen driver that your seller sent.
I fixed my touchscreen. It works for me.
1. unzip the folder and copy TouchSetting. gt to C:\Windows\INF.
2. disable windows driver signature verification (find how to do it in your version of windows).
3. Remove the touchscreen device in device manager (if it is installed)
4. Install the driver in device manager from the "package" folder (agree with the warning that the driver is not suitable).
5. reboot
6. calibrate touchscreen from windows control panel
instructions without warranty at your own risk. driver from toposh 7 device. windows 11
ps
all magic in TouchSetting. gt file [CFG] section.
this file not read with newest divers.